[Illustration: BROWN'S ELECTRIC SPEED REGULATOR.]
Mr. Brown's system is based upon a new idea. The apparatus (see figure)
consists of two contacts connected by an electric circuit. One of them,
b, is fixed to the ship in such a way as to be constantly in the water,
while the other, a, corresponds to the position above which the screw
cannot rise without taking on a dangerous velocity. In the normal
situation of the ship, the electric circuit, c (in which circulates a
current produced by a dynamo, d), is closed through the intermedium of
the water, which establishes a connection between the two contacts. When
the contact, a, rises out of the water, the current is interrupted. The
electro, d, then frees its armature, f, and the latter is pulled back by
a spring--a motion that sets in action a small steam engine that closes
the moderator valve. When the contact, a, is again immersed, the
electro, e, attracts its armature, and thus brings the moderator valve
back to its normal position. It is clear that the contact, a, must be
insulated from the ship's side.
Several contacts, a, might be advantageously arranged one above another,
in order to close the moderator valve more or less, according to the
extent of the screw's rise or fall.
* * * * *
MAGNETO-ELECTRIC CROSSING SIGNAL.
Pages:
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135